Digital cantilever beam simply supported beam combined impact tester

1、 Product introduction:

 & nbsp; This instrument is a new multi-function cantilever beam and simply supported beam integrated impact testing machine. It does not need to dismantle the fixture and sample holder. The cantilever beam and simply supported beam test methods are automatically switched. It is convenient to use, simple to operate, and has high test accuracy. It is mainly used for the measurement of impact toughness of non-metallic materials such as hard thermoplastic molding and extrusion materials, hard thermosetting molding materials, and fiber reinforced thermosetting and thermoplastic composites< br />
2、 Executive Standard:

n  ISO179— 2000 Plastics— Determination of simply supported beam impact strength of hard materials

n  GB/T1043— 2008 Rigid Plastics Simple Beam Impact Test Method

n  JB/T8762— 1998 Plastic Simply Supported Beam Impact Tester

n  GB/T 18743-2002 Thermoplastic Pipes for Fluid Transport - Simple Beam Impact Test (applicable to pipe parts)

n  ISO180— 2000 Plastics— Determination of Cantilever Impact Strength of Rigid Materials

n  GB/T1843— 2008 Rigid Plastics Cantilever Beam Impact Test Method

n  JB/T8761— 1998 Plastic Cantilever Impact Tester

n  ASTM D256-2010 Test Method for Determining IZOD Pendulum Impact Strength of Plastics

3、 Product features:

Ø& nbsp; Integrated impact of cantilever beam and simply supported beam, without dismantling fixture and sample holder

Ø& nbsp; High precision intelligent controller, equipped with LCD, can read data intuitively and accurately

Ø& nbsp; It is the first company in China to use carbon fiber pendulum rod (which has applied for a patent) to improve the rigidity of materials in the impact direction and focus the impact mass on the center of mass of the pendulum, so as to truly achieve shock free impact test and increase the service life< br />
Ø& nbsp; Imported high resolution digital encoder is adopted, with higher and more stable angle test accuracy

Ø& nbsp; The impact hammer and imported ball bearing that conform to the aerodynamic principle greatly reduce the friction loss caused by machinery

Ø& nbsp; The final result is calculated automatically. The test data can be saved into 12 groups and averaged

Ø& nbsp; Chinese and English operation interfaces can be selected, and the test results can be in units of J/m, KJ/㎡, kg cm/cm, ft ib/in, etc.

Ø& nbsp; Built in micro printer printing test data

4、 Technical parameters:
name
Digital display suspension combined impact tester
model
XJL-5/5.5D
XJL-50D
Impact energy
cantilever beam
2.75J、5.5J
cantilever beam
11J、22J
Simply supported beam
1J、2J、4J、5J
Simply supported beam
7.5J、25J、50J
Preelevation angle
150°
Impact velocity
3.5m/s、2.9m/s
3.5m/s、3.8m/s
Center distance of pendulum
335mm、221mm
335mm、380mm
Support distance of simply supported beam
60mm、70mm、95mm
Radius of impact edge of cantilever beam
R=0.8± 0.2mm
Radius of simply supported beam impact edge
R=2mm± 0.5mm
Distance from impact blade to upper surface of jaw
22mm± 0.05mm
Included angle of impact blade
30°& plusmn; 1°
Power Supply
AC220V± 10% & nbsp; 50HZ