Heat deformation Vicat, softening point tester

Model: JZY-WKD-3

 
Product introduction:
 & nbsp; The thermal deformation Vicat and softening point temperature tester use PLC programmable controller to adjust the temperature and use computer display operation. The product is simple to operate, convenient to use, stable in performance, high in precision, and can monitor the test temperature and deformation during the test; At the end of the test, the system automatically stops heating, and can print test reports and test curves. This series of models are necessary instruments for self inspection of quality inspection units, colleges and enterprises& nbsp;& nbsp;< br />
2、 Product features:

 & nbsp; With the function of lifting and lowering the sample holder, the sample holder can be lifted or lowered at the beginning or end of the test. The machine is mainly used to measure the thermal deformation temperature and Vicat softening point temperature of non-metallic materials such as plastic, rubber, nylon, electrical insulation materials, etc.
Executive standard:
GB/T1633 Determination of Vicat Softening Temperature (VST) of Thermoplastics
GB/T1634 Plastics Determination of Deformation Temperature under Load Part 1: General Test Method
GB/T8802 Determination of Softening Temperature of Plastic Pipe Fittings
IS075-2013 Determination of Plastic Deformation Temperature under Load
ASTM D 648 Test Method for Thermal Deformation Temperature of Plastics
ASTM D 1525 Test Method for Vicat Softening Temperature of Plastics
Product advantages:
Intelligent PID regulation, accurate heating rate, accurate temperature control without difference
It can be used for thermal deformation test of various standard splines
Vicat softening point test of various standard splines
Hot deformation and Vicat softening point test can be conducted at the same time
The required load can be calculated automatically according to the test standard and spline size
Two heating rates can be selected, free switching, simple operation
It supports multiple strip tests and color separation of test curves, so as to visually see the test process of each group of samples
When the test is completed or the upper temperature limit is exceeded, the temperature control is automatically closed and shut down
It has dual protection of software over temperature protection and external mechanical over temperature protection, making the test worry free
Diversified report settings and perfect report printing function
:  Technical parameters:
Temperature control range: ambient temperature— 300℃
Heating rate: (120± 10) ℃/h  (12±1)℃/6min
 & nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp; (50±5)℃/h  & nbsp; (5±0.5)℃/6min
Temperature indication error: 0.1 ℃
Temperature control accuracy:± 0.5℃
Maximum deformation indication error:± 0.001mm
Deformation measurement range: 0— 2mm
Number of sample racks: 3
Load bar and tray mass: 68g
Test span: according to standard 64 or 100mm
Fuel tank volume: about 25L
Heating medium: methyl silicone oil or transformer oil
Cooling mode: natural cooling above 150, water cooling or natural cooling below 150
Heating power: 4kw;
5、 Accessories& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;< br />
1. One computer (configuration: brand host)

2. One printer (HP)

3. Electric cabinet& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp; One

4. Host& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp; One

5. Sample holder& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp; 3

6. Hot deformed indenter& nbsp;& nbsp;& nbsp; 3

7. Vicat Needle& nbsp;& nbsp;& nbsp;& nbsp;& nbsp; 3

8. Weights (including boxed weights); 3 sets (attached table)

9. Multi purpose power socket& nbsp;& nbsp;& nbsp; One

6、 Attached table: (accept non-standard customization)& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;& nbsp;
Weights
number
Weights
number
1000g
twelve
nine hundred and thirty-two
three
500g
three
200g
six
100g
three
50g
three
20g
six
10g
six
5g
three
2g
three
1g
three
 
 




nine hundred