1220S fully automatic plug and pull force tester

Product introduction:

The fully automatic insertion and removal force testing machine is applicable to the insertion and removal force testing of various connectors. For DC circuits with impedance performance, the resistance R should generally be considered (the size of capacitance and inductance should be considered only when analyzing the change process of DC current in capacitor charging and discharging and inductance)< br />
With the automatic centering device of patent design, completely accurate insertion and removal force test can be obtained. Windows can be used to set the Chinese screen, which is simple and convenient to operate, and all data can be stored (test conditions, displacement curves, life curves, inspection reports…… etc.)

Specification of full-automatic plug and pull force tester:< br />
Determine the maximum load:; 50kg

Minimum decomposition energy: 0.01Kg

Displacement resolution: 0.01mm

Maximum measuring height:; 150mm

Minimum fine adjustment distance: 0.01mm

Measuring speed range: 0.01~150mm/min

10. Y-axis travel range: 0~70mm

Transmission mechanism: ball screw

Drive motor: Japan Tamagawa servo motor

Beam spacing: 440mm

Appearance dimension: 600 * 280 * 1180mm

Weight: 100kg (machine)

Power supply: AC 220V

Main components of automatic insertion and extraction force tester:

Transmission mechanism: Japan THK ball screw

Horse& nbsp;& nbsp; Da: Japan Tamagawa servo motor

Load cell: American transmission high-precision sensor

Mobile platform: precision X-Y platform

Proximity switch: Taiwan FOTEK NPN type

Press & nbsp;& nbsp; Button: Japan Hequan IDEC

Clip& nbsp;& nbsp; With: automatic centering device; Single PIN retention clamp

Test items of automatic insertion and extraction force tester:< br />
Connector single hole plug test

Connector whole row plug test

Connector plug life test

Connector single PIN and plastic retention force test

Connector NORMAL FORCE test

General compression and tensile failure test

Can be connected to contact impedance components at the same time

Features of fully automatic plug and pull force tester:< br />
It can print and store graphs (displacement curve, life curve and inspection report)

The test data is stored in the hard disk (each data can be stored for an unlimited number of times)

The test conditions are set by the computer screen, which is convenient and fast (including plugging travel, speed, pause time……, etc.)

The contents of the inspection report header can be modified at any time