Mobile phone free drop tester, which is used to fix the test sample on the test equipment without packaging and attached with the attached battery in the state of power off, and drop it freely on the steel plate surface from a high place. In addition to allowing the surface to have scratches and small pits, the function, appearance and assembly should meet the requirements of relevant standards< br />
The machine adopts electric lifting and pneumatic falling structure, which makes the lifting positioning accurate and fast, and the falling is real and effective& nbsp; Equipped with special pneumatic fixture (adjustable stroke), the front end of the fixture is equipped with silicone rubber (to avoid pinching the product or operator), which can be used for drop test of mobile phones of various specifications; The drop height is driven by the motor and adjusted up and down by the precision screw drive. It operates stably and has low noise. It does not need to be moved up and down manually. It is also attached with a scale, which can accurately know the drop height of parts. The products can be dropped from different angles& nbsp;& nbsp;。< br />
Main technical parameters:

1. Maximum allowable weight of test piece: 5kg

2. Drop height: 300~1500mm

3. The diameter range of the product is 10mm-120mm

4. Product height range: 5mm-25mm

5. Drop height scale: steel, minimum scale 1mm

6. Use air source:≥ 0.5MPa

7. Machine power supply: 220V 50Hz