Melt index meter

Product model: JC-4000

1、 Product introduction:

  The melt index meter is used to measure the melt flow rate MFR value of various plastics and resins passing through a certain temperature and load in the viscous flow state and passing through the standard die every 10min. The plastic melt index meter is applicable to polycarbonate, polysulfone, fluoroplastics, nylon and other engineering plastics with high melting temperature, and also to polyethylene (PE), polystyrene (PS), polypropylene (PP), ABS resin, polyoxymethylene (POM) The testing of low melting temperature plastics such as polycarbonate (PC) resin is widely used in plastic production, plastic products, petrochemical and other industries, as well as related universities, scientific research institutions and commodity inspection departments< br />
1、 Executive Standard:

 & nbsp; The melt flow rate meter is applicable to the measurement of the specified thermoplastic melt mass flow rate in the national standard GB/T3682-2000 Determination of the Thermoplastic Melt Mass Flow Rate and Melt Volume Flow Rate. This standard adopts the provisions of ISO 1133:1997, and can also meet the ASTM D1238 test standard
2、 Test method: quality method

3、 Display mode: Chinese and English color LCD

4、 Product features:

·& nbsp; Color LCD display in Chinese and English

·& nbsp; Integrated manual and automatic cutting

·& nbsp; Double temperature control system, more accurate temperature control, higher heating efficiency

·& nbsp; Double inlet sensor, more accurate temperature gradient, independent use, and longer service life

·& nbsp; The barrel is imported Hastelloy nitrided, and the die is made of carbon tungsten steel. The material used is less than br/>
·& nbsp; The insulation barrel is made of all sus304 stainless steel, which will not rust under long-term high temperature

·& nbsp; Automatically calculate the results and print them out< br />
5、 Main technical parameters:

·& nbsp;& nbsp; Temperature range: 0 ℃ - 450 ℃

·& nbsp;& nbsp; Temperature fluctuation:± 0.2℃

·& nbsp;& nbsp; Temperature uniformity:± 1℃

·& nbsp;& nbsp; Temperature display resolution: 0.1 ℃

·& nbsp; Time display resolution: 0.1S

·& nbsp;& nbsp;& nbsp; Barrel diameter:Φ 2.095± 0.005mm

·& nbsp;& nbsp; Discharge port length: 8.000± 0.025mm

·& nbsp;& nbsp; Diameter of charging barrel:Φ 9.550± 0.025mm

·& nbsp;& nbsp; Weight precision:± 0.5%

·& nbsp;& nbsp; Output mode: micro automatic printout

·& nbsp;& nbsp; Cutting method: manual and automatic cutting integration

·& nbsp;& nbsp; Test load: 8 levels in total, 8 sets of weights

·& nbsp;& nbsp; Power supply voltage: AC220V± 10% & nbsp; 50HZ  & nbsp;< br />